Jivelite freezes…

Hi Heiner,

I am using Rpi3B and 2.45. I re-installed m2p, without external DAC it works as it should without falls. I will try your recomendations regarding separate powering of USB DAC, I will report later.
BTW, is it possible somehow to prevent desktop showing on starting and after booting text on next step show Jivelite immediately without desktop picture?
p.s. I have tried some hints and have hide booting text at all – there was three „running“ points only in the center of screen before desktop shows up, but I want to skip desktop after that and to show Jivelite immediatelly. Can you give me… I don’t know… some url about it or may be you know the exact solution? Thank you!

Well, again.
Today I repeated from scratch. During all the process of installation none of any USB devices was plugged to rpi at all.
My steps was next:
1. Burning of „m2p_stretch_rpi_245.img“ through Win32DiskImager to micro SD card.
2. Connection to WiFi Access Point with SSID „max2play“
Configuration through web-interface:
3. Load WiFi interface (indicated my home SSID).
4. Raspberry settings -> Choose Soundcard to load on boot (device tree overlay)-> USB Soundcards (Northsta…)->save
5. Settings/Reboot -> reboot
And again I am getting similar error during every booting after:

I think this is some kind of global issue and will be repeated on the same rpi3B+m2p_2.45?..

p.s. Later I have enebled Jivelite and Squeezebox Server, but nothing changed anyway of course with that error (etc/rc.local Compatibility). After that I have tried apt –fix-broken install and apt-get upgrade\update – no success too

• This reply was modified 6 years, 6 months ago by bisesik.

This error occur only after I enabling USB sound card.

Everytime I got this messages after installation (yellow text):

This installer for USB-Hiface Soundcards installs the latest Kernel official Kernel with Kernel Headers, compiles a modified module and sets this module (snd-usb-hiface) to autostart – this might take a while…

Hit:1 http://mirrordirector.raspbian.org/raspbian stretch InRelease
Hit:2 http://archive.raspberrypi.org/debian stretch InRelease
Reading package lists…
make -C /lib/modules/4.14.24-v7+/build SUBDIRS=/opt/snd-usb-asyncaudio modules
Makefile:8: recipe for target ‚default‘ failed
finished – reboot needed!

What should I try?..

Well… After installing of LCD_driver, this error came back. However it not takes much time and occurs before jivelite for less than a second. It is very strange though, but the booting time is ok anyway now.

Hi Heiner
That error occurs even when LCD display is connected only. I think, PSU is good enough (5V@4A). But I will try to power LCD from its separate microUSB, will post later.

BTW, how to attach img file from my PC here?