Statics heard w Raspi3 and HifiBerry AMP2 on one the stereo channels (speakers)

Max2Play Home › Forums › Max2Play on Raspberry PI › Statics heard w Raspi3 and HifiBerry AMP2 on one the stereo channels (speakers)

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Back to forum
    Posted in: Max2Play on Raspberry PI
  • dcassin premium
    10. Februar 2018 at 23:46 #33942

    Hallo I just purchased a HifiBerry Amp2 card and Raspberry PI3 and Max2play version 2.45 image stored on an SD card from Max2play, I installed Shairport, Squeezelite and Squeezebox server. I can play music fine either using iPeng app orfrom the Music app + airplay on the iphone.
    In both these situations my left channel plays music interrupted by continuous static noises. I tried inverting the speakers, playing using the Hifiberry +raspi 3 board as an Airplay speaker, or accessing the player through Ipeng and Squeezebox. The static noise on 1 of the channels continues without stop. I think I have a defective HiFiBerry board. How can I fix this?
    Sincerely, Daniele

    • This topic was modified 6 years, 9 months ago by dcassin.
    Heiner premium
    12. Februar 2018 at 13:41 #33956

    Hi Daniele,

    Please first try adding the following paramter to your command line options in Squeezelite: -C 5

    Make sure that hardware volume control is correctly working. (volume sliders should automatically adjust to changes in volume in the LMS interface)

    The previous entries in the command line options of Squeezelite should be -o hw:0 -V Digital when built-in audio is deactivated in the Raspberry Settings.

    dcassin premium
    12. Februar 2018 at 21:35 #33964

    I did it but it keeps doing it. The volume changes as I change it in Logiteck media server. I noticed that the static is heard more on a pause or when the music track has less volume. Say in a pause. You hear it less with high Volume. Also if I change a radio channel.

    Heiner premium
    13. Februar 2018 at 16:56 #33985

    Hi dcassin,

    Could you put the -C 5 in front of the other parameters?

    If this still does not solve the issue, please contact us via email and we can make sure this is a hardware defect that needs replacement.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Register here