Jivelite + IR

Max2Play Home › Forums › Max2Play as Squeezebox (Player / Server) › Jivelite + IR

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Back to forum
    Posted in: Max2Play as Squeezebox (Player / Server)
  • adamericson premium
    18. November 2017 at 12:27 #32520

    Hello,

    I have a Raspi 3 B
    I have a pifi dac which is working great
    It has an IR receiver witch is working (checked with pi@raspberrypi ~ $ sudo /etc/init.d/lirc stop
    pi@raspberrypi ~ $ mode2 -d /dev/lirc0)

    I used the just-boom IR add on and i change the lirc config to the one i made of my remote (tested and works in other software)

    But i get Currently installed IR-Mode: jivelite
    IR Software NOT Running! in the IR plugin page.

    Thank you!

    -Adam Ericson

    • This topic was modified 7 years ago by adamericson. Reason: Grammer
    Heiner premium
    21. November 2017 at 17:35 #32570

    Hi Adam,

    Please try running the IR according to our guide without any manual steps, starting from a freshly burnt image.

    Here’s the guide: https://www.max2play.com/en/set-up-justboom-ir-remote/

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here