Known issue with HDMI sound on Raspberry 2? WLAN not stable after kernel update.

Max2Play Home › Forums › Max2Play on Raspberry PI › Known issue with HDMI sound on Raspberry 2? WLAN not stable after kernel update.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Back to forum
    Posted in: Max2Play on Raspberry PI
  • wartel premium
    18. April 2017 at 19:11 #28330

    Is there a known issue with using HDMI as a sound output on Raspberry 2 with the standard kernel? If I use this as an output, nothing can be heard (using a HDMI audio extractor). I found somewhere a note that a Kernel-Update is needed. So I did (via the Web-Interface). Then it worked. However, WLAN (with an EDIMAX WLAN USB Dongle) becomes quite unstable in a way that I need to reset the network interface every 5 minutes or so. Solved the issue temporarily by streaming to a Bluetooth Box via a LogiLink Bluetooth 4.0 dongle instead of the kernel update (and using HDMI). Feels a bit unnatural as a workaround 😉
    BTW if a Kernel-Update is mandatory for Raspberry 2 to use the HDMI output, it would be quite nice to have a note in the Web-Interface.

    • This topic was modified 7 years, 7 months ago by wartel.
    • This topic was modified 7 years, 7 months ago by wartel.
    Mbydeen
    20. April 2017 at 10:42 #28370

    Hi wartel

    Thank you for sharing your experience regarding HDMI as a sound output.

    Normally, using HDMI as sound output does not need kernel update, however the option for using it is already exist on the Raspberry Settings page, using this option:

    Enable High-Resolution Audio on HDMI to default and if you want to Activate 192Khz sample rate and 32Bit encoding for soundoutput through HDMI.

    Best Regards,
    Mohammad Mbydeen

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here