install_max2play.sh

I got it to work on the NanoPi NEO Air. I put my e-mail in and rebooted it and then no more WiFi! Got a RS-232 on it so worked on getting WiFi working again. Took a wile and got it working.

Can go to it’s main page now for max2play. But I can’t start Squeezelite.

I can play a mp3 with the command line and it works like this.

root@air:~# madplay /media/JvB1on1c64.mp3
MPEG Audio Decoder 0.15.2 (beta) - Copyright (C) 2000-2004 Robert Leslie et al.
          Title: Jordan VS BIRD: One on One
         Artist: Electronic Arts
          Album: commodore 64
           Year: 1988
          Genre: video game
        Comment: From the commodore 64 computer JORDAN VS BIRD: One on one by
                 joe Hellesen, Mark Madland. Electronic Arts (R) 1988
7122 frames decoded (0:03:06.0), -3.6 dB peak amplitude, 0 clipped samples
root@air:~#

The info on this sound is here.

It seems like if I do any settings with Max2play on it then it messes up the WiFi and „This site can’t be reached“. This NanoPi NEO Air seems like it don’t have a stander WiFi. Like nmtui will not work with it just shows blank.

It be neat to have max2play working good on this. Seems like all most got it.

-Raymond Day

Here is the debut info.

#### SQUEEZELITE VERSION ####
Squeezelite v1.8.6-830, Copyright 2012-2015 Adrian Smith, 2015-2017 Ralph Irving.
 

#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT DSD
 

#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o hw:CARD=Pcm5102a,DEV=0 -a 80:4:: madplay
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d plughw:CARD=sndhdmi,DEV=0
USE_USB_DAC=0
USE_EQUALIZER=0
 

#### SQUEEZELITE -l ####
Output devices:
  null                           - Discard all samples (playback) or generate zero samples (capture)
  sysdefault:CARD=Pcm5102a       - Pcm5102a,  - Default Audio Device
  dmix:CARD=Pcm5102a,DEV=0       - Pcm5102a,  - Direct sample mixing device
  dsnoop:CARD=Pcm5102a,DEV=0     - Pcm5102a,  - Direct sample snooping device
  hw:CARD=Pcm5102a,DEV=0         - Pcm5102a,  - Direct hardware device without any conversions
  plughw:CARD=Pcm5102a,DEV=0     - Pcm5102a,  - Hardware device with all software conversions
  sysdefault:CARD=sndhdmi        - sndhdmi,  - Default Audio Device
  dmix:CARD=sndhdmi,DEV=0        - sndhdmi,  - Direct sample mixing device
  dsnoop:CARD=sndhdmi,DEV=0      - sndhdmi,  - Direct sample snooping device
  hw:CARD=sndhdmi,DEV=0          - sndhdmi,  - Direct hardware device without any conversions
  plughw:CARD=sndhdmi,DEV=0      - sndhdmi,  - Hardware device with all software conversions

 

#### SHAIRPORT VERSION ####
2.8.6-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc
 

#### OUTPUT SOUND DETAILS CARD 0 ####
closed
 

#### OUTPUT SOUND DETAILS CARD 1 ####
closed

-Raymond Day

Posted it some place else but all I had to do to fix this was a command to install the player. apt install squeezelite and it fixed it.

But hard to know this I would have to test more but on a reboot it would lose it’s WiFi. I had to edit the /etc/network/interfaces thought the RS-232 to get it back.

But I plug in a USB to Ethernet on it and got on it like that and unchecked the Load WiFi Interface and rebooted and that worked. Even though the it’s still checked on the Load WiFi Interface.

So seems like working good now.

It seems like they changed that install_max2play.sh so it don’t work with other systems. To get it to work have to open it and look at the commands and copy and paste them on the command line. Not all just the ones that look like things it don’t do.

So I just don’t get why can’t the install_max2play.sh just say other when it don’t find a Odroid or Pi.

-Raymond Day