- This topic has 5 replies, 3 voices, and was last updated 8 years, 9 months ago by
.
Viewing 6 posts - 1 through 6 (of 6 total)
-
I get this error:
libkmod: ERROR ../libkmod/libkmod-module.c:174 kmod_module_parse_depline: ctx=0x78db7008 path=/lib/modules/3.18.7-v7+/kernel/sound/usb/snd-usbmidi-lib.ko error=No such file or directory libkmod: ERROR ../libkmod/libkmod-module.c:174 kmod_module_parse_depline: ctx=0x78db7008 path=/lib/modules/3.18.7-v7+/kernel/sound/usb/snd-usbmidi-lib.ko error=No such file or directory ERROR: could not insert 'snd_usb_audio': Unknown symbol in module, or unknown parameter (see dmesg)dmesg shows this:
[ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.18.7-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache [ 0.000000] Machine model: Raspberry Pi 2 Model B [ 0.000000] cma: Reserved 8 MiB at 0x36800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 225280 [ 0.000000] free_area_init_node: node 0, pgdat 80820480, node_mem_map b611300 0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 225280 pages, LIFO batch:31 [ 0.000000] [bcm2709_smp_init_cpus] enter (8620->f3003010) [ 0.000000] [bcm2709_smp_init_cpus] ncores=4 [ 0.000000] PERCPU: Embedded 11 pages/cpu @b60dd000 s12864 r8192 d24000 u4505 6 [ 0.000000] pcpu-alloc: s12864 r8192 d24000 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 223520 [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1776 bcm2708_fb.fbheight=952 bcm2709.boardrev=0xa01041 bcm2709.serial=0x716b899 smsc9 5xx.macaddr=B8:27:EB:16:B8:99 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm27 09.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base =0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115 200 console=tty1 root=/dev/mmcblk0p6 rootfstype=ext4 elevator=deadline rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 875716K/901120K available (5785K kernel code, 377K rwdata , 1760K rodata, 396K init, 771K bss, 25404K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xb7800000 - 0xff000000 (1144 MB) [ 0.000000] lowmem : 0x80000000 - 0xb7000000 ( 880 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x80766748 (7546 kB) [ 0.000000] .init : 0x80767000 - 0x807ca000 ( 396 kB) [ 0.000000] .data : 0x807ca000 - 0x808287ec ( 378 kB) [ 0.000000] .bss : 0x808287ec - 0x808e96d4 ( 772 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:480 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt). [ 0.000015] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 35791 39424256ns [ 0.000039] Switching to timer-based delay loop, resolution 52ns [ 0.000338] Console: colour dummy device 80x30 [ 0.001764] console [tty1] enabled [ 0.001815] Calibrating delay loop (skipped), value calculated using timer fr equency.. 38.40 BogoMIPS (lpj=192000) [ 0.001900] pid_max: default: 32768 minimum: 301 [ 0.002317] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002376] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003660] Initializing cgroup subsys memory [ 0.003750] Initializing cgroup subsys devices [ 0.003802] Initializing cgroup subsys freezer [ 0.003852] Initializing cgroup subsys net_cls [ 0.003916] Initializing cgroup subsys blkio [ 0.004028] CPU: Testing write buffer coherency: ok [ 0.004148] ftrace: allocating 19969 entries in 59 pages [ 0.053457] CPU0: update cpu_capacity 1024 [ 0.053533] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.053570] [bcm2709_smp_prepare_cpus] enter [ 0.053734] Setting up static identity map for 0x536c78 - 0x536cd0 [ 0.113422] [bcm2709_boot_secondary] cpu:1 started (0) 17 [ 0.113737] CPU1: Booted secondary processor [ 0.113745] [bcm2709_secondary_init] enter cpu:1 [ 0.113798] CPU1: update cpu_capacity 1024 [ 0.113807] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.133391] [bcm2709_boot_secondary] cpu:2 started (0) 17 [ 0.133649] CPU2: Booted secondary processor [ 0.133655] [bcm2709_secondary_init] enter cpu:2 [ 0.133686] CPU2: update cpu_capacity 1024 [ 0.133694] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.153449] [bcm2709_boot_secondary] cpu:3 started (0) 18 [ 0.153686] CPU3: Booted secondary processor [ 0.153693] [bcm2709_secondary_init] enter cpu:3 [ 0.153724] CPU3: update cpu_capacity 1024 [ 0.153733] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.153829] Brought up 4 CPUs [ 0.153950] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.153983] CPU: All CPU(s) started in SVC mode. [ 0.155026] devtmpfs: initialized [ 0.178251] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.180423] pinctrl core: initialized pinctrl subsystem [ 0.183475] NET: Registered protocol family 16 [ 0.189095] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.213243] cpuidle: using governor ladder [ 0.243273] cpuidle: using governor menu [ 0.243675] bcm2709.uart_clock = 3000000 [ 0.246446] No ATAGs? [ 0.246510] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.246567] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.246629] mailbox: Broadcom VideoCore Mailbox driver [ 0.246760] bcm2708_vcio: mailbox at f300b880 [ 0.247144] bcm_power: Broadcom power driver [ 0.247186] bcm_power_open() -> 0 [ 0.247212] bcm_power_request(0, 8) [ 0.747917] bcm_mailbox_read -> 00000080, 0 [ 0.747949] bcm_power_request -> 0 [ 0.748105] Serial: AMBA PL011 UART driver [ 0.748265] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3 [ 1.266584] console [ttyAMA0] enabled [ 1.336668] SCSI subsystem initialized [ 1.340686] usbcore: registered new interface driver usbfs [ 1.346352] usbcore: registered new interface driver hub [ 1.351811] usbcore: registered new device driver usb [ 1.358772] Switched to clocksource arch_sys_counter [ 1.393591] FS-Cache: Loaded [ 1.396842] CacheFiles: Loaded [ 1.412254] NET: Registered protocol family 2 [ 1.417879] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.425134] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.431834] TCP: Hash tables configured (established 8192 bind 8192) [ 1.438300] TCP: reno registered [ 1.441578] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.447562] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.454320] NET: Registered protocol family 1 [ 1.459177] RPC: Registered named UNIX socket transport module. [ 1.465118] RPC: Registered udp transport module. [ 1.469904] RPC: Registered tcp transport module. [ 1.474627] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.482135] bcm2708_dma: DMA manager at f3007000 [ 1.486948] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000 000(1008 MiB) [ 1.496888] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.503354] audit: initializing netlink subsys (disabled) [ 1.508881] audit: type=2000 audit(1.299:1): initialized [ 1.530541] VFS: Disk quotas dquot_6.5.2 [ 1.534855] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.544535] FS-Cache: Netfs 'nfs' registered for caching [ 1.550913] NFS: Registering the id_resolver key type [ 1.556048] Key type id_resolver registered [ 1.560276] Key type id_legacy registered [ 1.565404] msgmni has been set to 1726 [ 1.571039] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52) [ 1.578653] io scheduler noop registered [ 1.582639] io scheduler deadline registered (default) [ 1.588110] io scheduler cfq registered [ 1.594641] BCM2708FB: allocated DMA memory f6c00000 [ 1.599703] BCM2708FB: allocated DMA channel 0 @ f3007000 [ 1.633694] Console: switching to colour frame buffer device 222x59 [ 1.657926] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driv er [ 1.665754] uart-pl011 dev:f1: no DMA platform data [ 1.671305] vc-cma: Videocore CMA driver [ 1.675309] vc-cma: vc_cma_base = 0x00000000 [ 1.680128] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 1.685625] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 1.703044] brd: module loaded [ 1.712360] loop: module loaded [ 1.715930] vchiq: vchiq_init_state: slot_zero = 0xb6800000, is_master = 0 [ 1.723819] Loading iSCSI transport class v2.0-870. [ 1.729858] usbcore: registered new interface driver smsc95xx [ 1.735786] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.942029] Core Release: 2.80a [ 1.945249] Setting default values for core params [ 1.950199] Finished setting default values for core params [ 2.156288] Using Buffer DMA mode [ 2.159695] Periodic Transfer Interrupt Enhancement - disabled [ 2.165633] Multiprocessor Interrupt Enhancement - disabled [ 2.171325] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 2.175770] Dedicated Tx FIFOs mode [ 2.179724] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xb6c 14000 dma = 0xf6c14000 len=9024 [ 2.189790] FIQ FSM acceleration enabled for : [ 2.189790] Non-periodic Split Transactions [ 2.189790] Periodic Split Transactions [ 2.189790] High-Speed Isochronous Endpoints [ 2.215667] dwc_otg: Microframe scheduler enabled [ 2.215741] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x803e4200 [ 2.226182] WARN::hcd_init_fiq:413: FIQ ASM at 0x803e455c length 36 [ 2.236938] WARN::hcd_init_fiq:438: MPHI regs_base at 0xb7806000 [ 2.247441] dwc_otg bcm2708_usb: DWC OTG Controller [ 2.256834] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1 [ 2.268631] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000 [ 2.278721] Init: Port Power? op_state=1 [ 2.287190] Init: Power Port (0) [ 2.295195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.306538] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 2.318265] usb usb1: Product: DWC OTG Controller [ 2.327427] usb usb1: Manufacturer: Linux 3.18.7-v7+ dwc_otg_hcd [ 2.337888] usb usb1: SerialNumber: bcm2708_usb [ 2.347895] hub 1-0:1.0: USB hub found [ 2.356175] hub 1-0:1.0: 1 port detected [ 2.365039] dwc_otg: FIQ enabled [ 2.365053] dwc_otg: NAK holdoff enabled [ 2.365063] dwc_otg: FIQ split-transaction FSM enabled [ 2.365102] Module dwc_common_port init [ 2.365505] usbcore: registered new interface driver usb-storage [ 2.376274] mousedev: PS/2 mouse device common for all mice [ 2.386970] bcm2835-cpufreq: min=600000 max=900000 [ 2.396570] sdhci: Secure Digital Host Controller Interface driver [ 2.407236] sdhci: Copyright(c) Pierre Ossman [ 2.416276] DMA channels allocated for the MMC driver [ 2.458813] Load BCM2835 MMC driver [ 2.474371] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.485092] ledtrig-cpu: registered to indicate activity on CPUs [ 2.495812] hidraw: raw HID events driver (C) Jiri Kosina [ 2.507989] usbcore: registered new interface driver usbhid [ 2.519115] usbhid: USB HID core driver [ 2.529828] TCP: cubic registered [ 2.537589] Initializing XFRM netlink socket [ 2.546346] NET: Registered protocol family 17 [ 2.555367] Key type dns_resolver registered [ 2.564481] Registering SWP/SWPB emulation handler [ 2.568939] Indeed it is in host mode hprt0 = 00021501 [ 2.584211] registered taskstats version 1 [ 2.593063] vc-sm: Videocore shared memory driver [ 2.602278] [vc_sm_connected_init]: start [ 2.611568] [vc_sm_connected_init]: end - returning 0 [ 2.622376] Waiting for root device /dev/mmcblk0p6... [ 2.638860] mmc0: host does not support reading read-only switch, assuming wr ite-enable [ 2.655398] mmc0: new high speed SDHC card at address aaaa [ 2.666144] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 2.683772] mmcblk0: p1 p2 < p5 p6 p7 p8 p9 > p3 [ 2.746326] EXT4-fs (mmcblk0p6): INFO: recovery required on readonly filesyst em [ 2.748893] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 2.758345] Indeed it is in host mode hprt0 = 00001101 [ 2.778895] EXT4-fs (mmcblk0p6): write access will be enabled during recovery [ 2.949202] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 2.960615] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.973373] hub 1-1:1.0: USB hub found [ 2.981798] hub 1-1:1.0: 5 ports detected [ 3.268903] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 3.373941] EXT4-fs (mmcblk0p6): recovery complete [ 3.383610] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.392690] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. O pts: (null) [ 3.392755] VFS: Mounted root (ext4 filesystem) readonly on device 179:6. [ 3.403408] devtmpfs: mounted [ 3.404097] Freeing unused kernel memory: 396K (80767000 - 807ca000) [ 3.437982] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0 [ 3.453140] smsc95xx v1.0.4 [ 3.523013] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1 .1, smsc95xx USB 2.0 Ethernet, b8:27:eb:16:b8:99 [ 3.618984] usb 1-1.3: new high-speed USB device number 4 using dwc_otg [ 3.729807] usb 1-1.3: New USB device found, idVendor=20a0, idProduct=4143 [ 3.741797] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 3.741814] usb 1-1.3: Product: Luckit USB Audio 2.0 [ 3.741823] usb 1-1.3: Manufacturer: Luckit [ 3.741832] usb 1-1.3: SerialNumber: 0330 [ 3.839087] usb 1-1.4: new high-speed USB device number 5 using dwc_otg [ 3.950691] usb 1-1.4: New USB device found, idVendor=7392, idProduct=7822 [ 3.962741] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 3.975104] usb 1-1.4: Product: 802.11n WLAN Adapter [ 3.985059] usb 1-1.4: Manufacturer: Realtek [ 3.994284] usb 1-1.4: SerialNumber: 00e04c000001 [ 4.575069] udevd[175]: starting version 175 [ 5.390318] random: nonblocking pool is initialized [ 5.516350] usbcore: registered new interface driver rtl8192cu [ 7.476472] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null) [ 7.720826] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null) [ 12.542145] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 22.375442] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:1 02396k SSFS [ 22.911658] snd_usb_hiface: disagrees about version of symbol module_layout
Viewing 6 posts - 1 through 6 (of 6 total)
You must be logged in to reply to this topic.